CMS INDUSTRIES, INC.
Manufacturers of Heat Stop® Refractory Mortars
"A Leader in Fire-Safe Quality Masonry Products"
President: Bob Rucker
CMS Industries, Inc.
P.O. Box 60
Orchard Park, NY 14127
716 667 2321
rarucker@adelphia.net

Heat Stop® Refractory Mortar Products
Why you should specify Heat Stop®
Ten Most Frequently Asked Questions
Building A Masonry Firebox With Heat Stop®

Order Your Heat Stop® from a dealer near you
Order Your Heat Stop® On Line

Heat Stop® Refractory Mortar Products
Heat Stop® products are used in new installations of firebrick and clay flue lining and also used for repairs. Heat Stop® provides resistance to temperatures well above 2000 deg. F and meets all building codes.
Heat Stop® pre-mixed
Pre-mixed and ready to use as a regular refractory cement. Faster and easier for settling firebrick. Only 1/8" joint required. Water soluble, easy clean up. Gray in color. 15 lb. can or 50 lb. pail.

Domestic Fireplace Mortar
Same as Heat Stop® pre-mixed only beige in color and looser consistency. 15 lb. can or 50 lb. pail.

Heat Stop® II and Heat Stop® 50 dry mix
Best mix for both firebrick and flue installations. Fireplace masons prefer its workability and texture. Sets up fast in wet climates - no efflorescence. Non-Water Soluble in Service. Long shelf live and won't freeze in transit. Ready to use - just add water. Add any mortar color. 10 lb. pail or economical 50 lb bag.

Insul Stick
Combines insulating value and strength for maintenance and repair, parging smoke chambers or repairing clay flues or firebrick. Stronger, advanced composition. Non-water soluable. One gal. or 30 lb. pail.

Heat Cast-40
Castable refractory used to form and pour special shapes, hearth or sidewall or oven dome. One gallon buckets or 40 lb. bags.

Insulating Castable
A light weight, insulating castable refractory used to back up and insulate firebrick, flue liners or clay ovens. Can be poured or troweled. Big 35 lb. bags.

Ceramic Fiber Paper
Used to wrap flue liners to insulate and keep them from bonding with the surrounding masonry. Especially useful in seismic areas if, to save space, the vertical reinforcing steel must be placed between the flue liner and the surrounding masonry. See ASTM C-1283 Clay Flue Lining Installation Standard. 200 square foot rolls (100 foot roll two feet wide, 1/8" thick)

back to top of page
Why you should specify Heat Stop®
  • Required by Code
  • Exceeds ASTM Standards
  • Formulated for Masons
  • Widely Available
  • Proven Quality
  • back to top of page

    Order Your Heat Stop® from a dealer near you
    Order Your Heat Stop® On Line

    Buckley Rumford Fireplaces
    Copyright 1996 - 2006 Jim Buckley
    All rights reserved.
    webmaster